雙組份泵

　　短切噴射成型機
　　Chopped Fiber Spraying Machine
　　設備特征：1新一代增壓樹脂泵動力依然是壓縮空氣，适用于易燃易爆場所。2改進了(le)換向機構，使之靈活、耐用、易損件少、延長了(le)維修周期。3配有儲能裝置，工作時壓力平穩，脈動小，流量可調，霧化均勻。4輸出量大小可調節的(de)切割器根據要求可把纖維切成10-50mm。
　　設備用途：替代手工糊制玻璃鋼。适用于玻璃鋼儲罐、衛浴、雙壁罐、平闆、冷卻塔、水箱、風力發電葉片、汽車部件、管道内襯等産品的(de)制作。
　　設備優點：1比傳統手工制作提高了(le)效率，降低了(le)成本，提升了(le)産品質量。2 制品的(de)形狀、尺寸上基本沒有限制。3操作簡單，噴槍是外混型平時不用清洗。
　　Features:
　　1. The new generation resin pump takes compressed air as power, which is available for combustible and explosive area.
　　2. The modified reversing gear makes it more flexible and durable, reduces the vulnerable part, and extends the maintenance interval.
　　3. It is equipped with energy-accumulation system, and so it works with stable pressure and small fluctuation. In addition, the flow could be adjusted and the atomization is more even.
　　4. The cutting machine can chop the fiber into 10 to 50mm as required.
　　Application:
　　It can be used to replace the hand lay-up, manufacturing FRP tank, bathroom accessory, double wall tank, flat panel, cooling tower, water tank, blade for wind power, auto parts, pipe liner and so on.
　　Advantages:
　　1. Compared with traditional hand lay-up process, the machine can increase the efficiency, decrease the cost and prompt the quality.
　　2. No limit in product shape and dimension.
　　3. Easy operation. The mixing could be done outside, which not require the cleaning.
　　B2型
　　1：噴射樹脂 3.5-5Kg/min
　　2：短切玻纖 1.5-2.5Kg/min
　　3：壓力比 18：1
　　4：固化劑比例調節範圍 0.8- 3%
　　5 ：工作氣壓 0.3-0.7Mpa
　　6 ：空氣消耗量 50-500L/min
　　B2 Type:
　　1. Resin spraying velocity: 3.5-5kg/min
　　2. Chopped fiber velocity: 1.5-2.5kg/min
　　3. Pressure ratio: 18:1
　　4. Range of curing agent proportion: 0.8-3%
　　5. Work pressure: 0.3-0.7Mpa
　　6. Air consumption: 50-500L/min
　　B5型
　　1：噴射樹脂 4-8Kg/min
　　2：短切玻纖 1.5-2.5Kg/min
　　3：壓力比 11：1
　　4：固化劑比例調節範圍 0.8- 3%
　　5：工作氣壓 0.3-0.7Mpa
　　6：空氣消耗量 50-600L/min
　　B5 Type:
　　1. Resin spraying velocity: 4-8kg/min
　　2. Chopped fiber velocity: 1.5-2.5kg/min
　　3. Pressure ratio: 11:1
　　4. Range of curing agent proportion: 0.8-3%
　　5. Work pressure: 0.3-0.7Mpa
　　6. Air consumption: 50-600L/min